High Performance (HP) variable pitch end mills
Majac Mills High Performance end mills step up to premium carbide with a variable pitch that breaks up harmonics and reduces chatter. TiAlN coated, with a special core and heel design for rigidity, in square, ball nose and corner radius styles, including long reach.
Best for: Steels, stainless and cast iron where chatter is a problem.
Sizes available
Pick a diameter to see every High Performance tool in that size in the tool finder, with flutes, lengths and coatings.
- 1/8"2 tools
- 3/16"14 tools
- 1/4"26 tools
- 5/16"26 tools
- 3/8"27 tools
- 7/16"8 tools
- 1/2"39 tools
- 5/8"39 tools
- 3/4"42 tools
- 1"38 tools
Starting speeds and feeds
Surface speed (SFM) ranges and the chip load per tooth for a 1/2" diameter tool, from the Majac Mills speeds & feeds guide. Depth of cut up to 1.25× diameter for profiling and 0.75× diameter for full slotting. For other sizes, RPM, feed rate and chip thinning, use the speeds & feeds calculator.
| Material | SFM, TiAlN | Chip load (in/tooth), 1/2" |
|---|---|---|
| Aluminum & Aluminum Alloys | 900–1,800 | 0.0045 |
| Copper & Copper Alloys | 525–1,275 | 0.0035 |
| Brass & Bronze | 375–600 | 0.0035 |
| Cast Iron (soft) | 375–650 | 0.0035 |
| Cast Iron (hard) | 100–375 | 0.0025 |
| Ductile Iron | 100–600 | 0.0025 |
| Malleable Iron | 225–650 | 0.0035 |
| Low Carbon Steels | 300–600 | 0.0035 |
| Medium Carbon Steels | 150–375 | 0.0025 |
| Steels Hardened to 35 Rc | 130–345 | 0.002 |
| Steels Hardened to 50 Rc | 70–160 | 0.0015 |
| Mold Steels | 300–525 | 0.0025 |
| Tool Steels | 150–375 | 0.0025 |
| Stainless Steels (soft) | 300–450 | 0.0025 |
| Stainless Steels (hard) | 150–300 | 0.0015 |
| Monel & High Nickel Steel | 75–200 | 0.0025 |
| Titanium (soft) | 125–375 | 0.0025 |
| Titanium (hard) | 50–175 | 0.0014 |
| Nickel-Based High Temp Alloys | 50–125 | 0.0014 |