Majac Mills Made in Canada

Majac Mills premium carbide end mills

Our own line of solid carbide end mills, precision made in Canada: 4,146 tools in 6 series, available from Majac in Barrie, Ontario. Filter by size, flutes, series and coating to find the exact tool, then add it to a quote.

Made in Canada

Every Majac Mill is precision made in Canada, then stocked and supported by our team in Barrie, Ontario.

  • CNC groundOn 5-, 7- and 8-axis Walter Helitronic tool & cutter grinders
  • InspectedNon-contact Walter Helicheck measuring for tight tolerances
  • Coated in-housePlatit PVD coating centre: ALL4, TiAlN, ZrN and DLC
  • HonedRobotic edge honing and in-house wheel truing for consistency
  • General Purpose end mill
    GPGood

    General Purpose

    End mills for standard-performance applications, with a large selection of sizes at great prices. 10% micrograin carbide, uncoated (bright) or TiAlN coated. Square and ball nose end mills (including double-ended and long reach), plus drill/mills, spot drills and engravers, in fractional and metric sizes.

    View 1,750 tools About the General Purpose series
  • High Performance end mill
    HPBetter

    High Performance

    Variable pitch end mills in premium carbide for high performance applications: variable pitch reduces chatter. TiAlN coated, with a special core and heel design for rigidity. Square, ball nose and corner radius, including long reach.

    View 261 tools About the High Performance series
  • Ultra High Performance end mill
    UHPBest

    Ultra High Performance

    Variable pitch end mills in ultra high performance carbide for extreme production. TiAlN coated and polished after coating to reduce built-up edge, for maximum performance and tool life. Square, ball nose and corner radius.

    View 236 tools About the Ultra High Performance series
  • High Efficiency Milling end mill
    HEMDynamic milling

    High Efficiency Milling

    Variable pitch end mills in ultra high performance carbide, built for high efficiency milling: high axial and low radial depths of cut on dynamic and trochoidal toolpaths. 5, 6 and 7 flutes, mostly ALL4 coated, with or without chipbreakers.

    View 210 tools About the High Efficiency Milling series
  • High Temp Alloy & Stainless end mill
    HTASStainless & HRSA

    High Temp Alloy & Stainless

    Variable pitch end mills in a special high-cobalt carbide grade for stainless steels and heat-resistant alloys, which also work well in general steels. For conventional and HEM toolpaths. ALL4 coated, 4 to 7 flutes, square, ball nose and corner radius, longer lengths of cut, with or without chipbreakers.

    View 1,342 tools About the High Temp Alloy & Stainless series
  • Aluminum end mill
    ALBest

    Aluminum

    Balanced pitch end mills in ultra high performance carbide made for aluminum, from roughing to finishing. Polished flutes and sharp edges for clean chip flow. Uncoated, ZrN or DLC coated. Square, ball nose and corner radius, with chipbreakers available.

    View 347 tools About the Aluminum series

Compare the Majac Mills series

SeriesBest forFlutesCoatings DiametersEnd stylesChipbreakerTools
General Purpose (GP)Everyday milling in steel, cast iron, aluminum and plastics, at the best price1 to 4TiAlN, Uncoated (bright)1/32" to 1" · 1mm to 25mmSquare, Ball Nose–1,750
High Performance (HP)Steels, stainless and cast iron where chatter is a problem4 to 5TiAlN1/8" to 1"Square, Ball Nose, Corner Radius–261
Ultra High Performance (UHP)High-volume production in steels, stainless and cast iron4 to 5TiAlN1/8" to 1"Square, Ball Nose, Corner Radius–236
High Efficiency Milling (HEM)Dynamic and trochoidal toolpaths in steels, stainless and cast iron5 to 7ALL4, TiAlN1/4" to 1"Square, Corner RadiusYes210
High Temp Alloy & Stainless (HTAS)Stainless steel, titanium and nickel-based alloys such as Inconel; also general steels4 to 7ALL41/4" to 1"Square, Ball Nose, Corner RadiusYes1,342
Aluminum (AL)Aluminum and other non-ferrous metals, plastics and graphite2 to 3Uncoated (bright), ZrN, DLC1/8" to 1"Square, Ball Nose, Corner RadiusYes347

Choosing a coating

ALL4
A multilayer AlCrTiN coating built as a system: a tough base for adhesion, a nanolayer for impact resistance and a hard top layer for heat and wear. It resists more failure modes at once than TiAlN or AlTiN, so it's the most forgiving choice across steels, stainless and cast iron, wet or dry, and in interrupted cuts. Standard on HEM and HTAS.
TiAlN
Titanium aluminum nitride. The proven, economical choice for general steel and cast iron work. Standard on High Performance and Ultra High Performance, and available on General Purpose.
ZrN
Zirconium nitride. Low-friction coating for aluminum and non-ferrous metals that helps stop chips welding to the edge.
DLC
Diamond-like carbon. Very slick and hard, for high-silicon aluminum, plastics and other abrasive non-ferrous materials.
Uncoated (bright)
The sharpest edge, for aluminum, plastics and general use where a coating isn't needed.

HEM vs. traditional milling

High efficiency milling (HEM) uses a long axial depth of cut with a short radial depth of cut, usually on a dynamic or trochoidal toolpath, with more flutes (5 to 7) and higher speeds and feeds.

HEMTraditional
Depth of cutLong axial, short radialShort axial, long radial
Flutes5 to 72 to 4
Tool wearSpread over the full flute lengthConcentrated in a small area
HeatLowerHigher
Speed, feed & metal removalHigherLower
Tool lifeLongerShorter

With a light radial cut the chips get thinner, so the programmed feed must be raised to compensate (radial chip thinning). Our speeds & feeds calculator does this for you.

Tool finder

Quick filters:
Loading tools…

Need a size that isn't listed, or a custom tool? Contact us or call +1 705 728 8665. Full list: download CSV.

Your quote list

    Majac Mills questions

    Where are Majac Mills end mills made?

    In Canada. Majac Mills solid carbide end mills are CNC ground on Walter tool and cutter grinders, measured on Walter Helicheck equipment, PVD coated and robotically honed, then stocked and supported by Majac Tooling Supply in Barrie, Ontario.

    Which Majac Mills series should I use for stainless steel, titanium or Inconel?

    The HTAS (High Temp Alloy & Stainless) series. It uses a high-cobalt carbide grade with an ALL4 coating, 4 to 7 flutes and chipbreaker options, for both conventional and HEM toolpaths. The High Performance and Ultra High Performance series also cut stainless steel well.

    Which end mill is best for aluminum?

    The Aluminum (AL) series: 2 and 3 flute balanced pitch end mills with polished flutes and sharp edges for clean chip flow. Uncoated tools have the sharpest edge, ZrN helps stop chips welding to the edge, and DLC suits high-silicon aluminum, plastics and other abrasive materials.

    What is the difference between HEM and traditional milling?

    High efficiency milling (HEM) uses a long axial depth of cut with a short radial depth of cut on a dynamic or trochoidal toolpath, with 5 to 7 flutes and higher speeds and feeds. Wear is spread over the whole flute length, so the tool runs cooler and lasts longer. Because the chips get thinner, the feed must be raised; our speeds and feeds calculator does this for you.

    Which coating should I choose: ALL4, TiAlN, ZrN, DLC or uncoated?

    ALL4 is the most forgiving choice across steels, stainless and cast iron, wet or dry, and is standard on HEM and HTAS. TiAlN is the proven, economical choice for general steel and cast iron work. ZrN and DLC are for aluminum and non-ferrous metals, with DLC best for abrasive materials. Uncoated (bright) tools have the sharpest edge for aluminum and plastics.

    Do you have metric end mills?

    Yes. The General Purpose series includes metric end mills from 1 mm to 25 mm. The other series are fractional inch sizes up to 1 inch.

    What do chipbreakers do, and which series have them?

    Chipbreaker flutes cut the chip into short pieces, which makes roughing easier on the machine and helps chips clear the cut. Chipbreaker versions are available in the HEM, HTAS and Aluminum series.

    How do I get pricing and how quickly will I hear back?

    Add the tools you need to the quote list in the tool finder and send it, or call us at +1 705 728 8665 (toll-free +1 800 265 4832). We reply to quote requests within one business day.

    Looking for a reliable & stable partner?

    Contact us

    Sign up for our newsletter and promotions

    New tools, promotions and tech tips from Majac. Unsubscribe anytime.

    Call us

    Are you ready to work together?

    Tell us what you need and our team will get back to you within one business day.

    Prefer to talk?
    +1 705 728 8665

    Request a quote