Majac Mills come in six series. They all use solid carbide, but each is built for a different job. Picking the right one is the easiest way to get better tool life without changing anything else in your process.
The short version
| If you're cutting… | Start with | Why |
|---|---|---|
| General shop work, short runs, a wide range of sizes | GP General Purpose | Large selection, uncoated or TiAlN, good value |
| Steels and cast iron, longer runs | HP High Performance | Variable pitch reduces chatter; premium carbide |
| Steels in high production | UHP Ultra High Performance | Ultra premium carbide, polished after coating |
| Steels on dynamic / trochoidal toolpaths | HEM High Efficiency Milling | 5 to 7 flutes built for high axial, low radial cuts |
| Stainless, titanium, nickel alloys | HTAS High Temp Alloy & Stainless | High-cobalt carbide grade made to handle heat |
| Aluminum, copper, brass, plastics | AL Aluminum | 2 and 3 flutes, polished flutes, sharp edges |
General Purpose (GP)
GP is the workhorse line: 10% micrograin carbide, honed edges, and the biggest range of sizes, from 1/32" up and in metric. You can get it uncoated (bright) for aluminum and plastics, or TiAlN coated for steels and cast iron. The range covers square and ball nose end mills in 2, 3 and 4 flutes, double-ended and long reach tools, plus drill/mills, spot drills and engravers.
Choose GP when you need an odd size, a one-off job, or a dependable tool at a good price.
High Performance (HP)
HP adds variable pitch: the flutes aren't evenly spaced, which breaks up the harmonics that cause chatter. It uses premium carbide, TiAlN coating and a core design that adds rigidity. It comes in 4 and 5 flutes, square, ball nose and corner radius, including long reach.
Choose HP when you're seeing chatter or want more tool life in steel and cast iron than a general purpose tool gives you.
Ultra High Performance (UHP)
UHP is the step up for production work: ultra high performance carbide, variable pitch, and TiAlN that's polished after coating to reduce built-up edge. It comes in 4 and 5 flutes, square, ball nose and corner radius.
Choose UHP when the job runs every day and cycle time and tool life really matter.
High Efficiency Milling (HEM)
HEM tools are built for a different style of milling: a long axial depth of cut with a light radial step-over, run fast on a dynamic or trochoidal toolpath. They have 5, 6 or 7 flutes, are mostly ALL4 coated, and come as a finisher or with chipbreakers to keep chips small.
Choose HEM if your CAM software can program adaptive or dynamic toolpaths. Read HEM explained for how to set the feed correctly.
High Temp Alloy & Stainless (HTAS)
HTAS uses a higher-cobalt carbide grade and updated geometry to handle the heat that stainless steels and heat-resistant alloys generate. It's ALL4 coated, comes in 4 to 7 flutes with corner radius options and longer lengths of cut, and works on both conventional and HEM toolpaths. It also performs well in general steels.
Choose HTAS for stainless, titanium, Inconel-type nickel alloys and Monel. See Machining stainless and high-temp alloys with HTAS.
Aluminum (AL)
AL tools are made only for non-ferrous work: 2 and 3 flutes, polished flutes and sharp edges so chips flow out cleanly. They come uncoated, ZrN or DLC coated, in square, ball nose and corner radius, with chipbreaker versions for roughing.
Still not sure?
Use the Majac Mills tool finder to filter by series, size and flutes, or send us your part details and our technicians will recommend a tool.
Questions about your application? Our technicians are happy to help. Call +1 705 728 8665 or .