General Purpose (GP) carbide end mills
The Majac Mills General Purpose series is the economical choice for everyday milling: square and ball nose end mills in 10% micrograin carbide, uncoated or TiAlN coated, in fractional and metric sizes, plus drill/mills, spot drills and engravers. Like every Majac Mill, they're made in Canada.
Best for: Everyday milling in steel, cast iron, aluminum and plastics, at the best price.
Sizes available
Pick a diameter to see every General Purpose tool in that size in the tool finder, with flutes, lengths and coatings.
- 1/32"32 tools
- 3/64"32 tools
- 1/16"32 tools
- 5/64"12 tools
- 3/32"32 tools
- 7/64"20 tools
- 1/8"52 tools
- 9/64"12 tools
- 5/32"40 tools
- 11/64"12 tools
- 3/16"60 tools
- 13/64"12 tools
- 7/32"40 tools
- 15/64"12 tools
- 1/4"69 tools
- 17/64"12 tools
- 9/32"20 tools
- 19/64"12 tools
- 5/16"68 tools
- 21/64"12 tools
- 11/32"20 tools
- 23/64"12 tools
- 3/8"77 tools
- 25/64"12 tools
- 13/32"12 tools
- 27/64"12 tools
- 7/16"52 tools
- 29/64"12 tools
- 15/32"12 tools
- 31/64"12 tools
- 1/2"79 tools
- 33/64"12 tools
- 17/32"12 tools
- 35/64"12 tools
- 9/16"28 tools
- 37/64"12 tools
- 19/32"12 tools
- 39/64"12 tools
- 5/8"61 tools
- 41/64"12 tools
- 21/32"12 tools
- 43/64"12 tools
- 11/16"12 tools
- 45/64"12 tools
- 23/32"12 tools
- 47/64"12 tools
- 3/4"69 tools
- 49/64"12 tools
- 25/32"12 tools
- 51/64"12 tools
- 13/16"12 tools
- 53/64"12 tools
- 27/32"12 tools
- 55/64"12 tools
- 7/8"12 tools
- 57/64"12 tools
- 29/32"12 tools
- 59/64"12 tools
- 15/16"12 tools
- 61/64"12 tools
- 31/32"12 tools
- 63/64"12 tools
- 1"48 tools
- 1mm10 tools
- 1.5mm10 tools
- 2mm10 tools
- 2.5mm10 tools
- 3mm18 tools
- 3.5mm10 tools
- 4mm18 tools
- 4.5mm10 tools
- 5mm18 tools
- 6mm18 tools
- 7mm10 tools
- 8mm18 tools
- 9mm10 tools
- 10mm18 tools
- 11mm10 tools
- 12mm18 tools
- 14mm18 tools
- 16mm14 tools
- 18mm14 tools
- 20mm14 tools
- 22mm10 tools
- 25mm14 tools
Starting speeds and feeds
Surface speed (SFM) ranges and the chip load per tooth for a 1/2" diameter tool, from the Majac Mills speeds & feeds guide. Depth of cut up to 1× diameter for profiling and 0.5× diameter for full slotting. For other sizes, RPM, feed rate and chip thinning, use the speeds & feeds calculator.
| Material | SFM, Uncoated | SFM, TiAlN | Chip load (in/tooth), 1/2" |
|---|---|---|---|
| Aluminum & Aluminum Alloys | 600–1,200 | 900–1,800 | 0.004 |
| Copper & Copper Alloys | 350–850 | 525–1,275 | 0.003 |
| Brass & Bronze | 250–400 | 375–600 | 0.003 |
| Graphite | 500–800 | 500–1,200 | 0.003 |
| Plastics | 600–1,100 | 600–1,650 | 0.006 |
| Cast Iron (soft) | 250–450 | 375–650 | 0.003 |
| Cast Iron (hard) | 100–250 | 100–375 | 0.002 |
| Ductile Iron | 80–400 | 100–600 | 0.002 |
| Malleable Iron | 150–500 | 225–650 | 0.003 |
| Low Carbon Steels | 200–400 | 300–600 | 0.003 |
| Medium Carbon Steels | 100–250 | 150–375 | 0.002 |
| Steels Hardened to 35 Rc | 130–230 | 130–345 | 0.0015 |
| Steels Hardened to 50 Rc | 70–130 | 70–160 | 0.001 |
| Steels Hardened to 60 Rc | 30–70 | 30–90 | 0.001 |
| Mold Steels | 200–350 | 300–525 | 0.002 |
| Tool Steels | 100–250 | 150–375 | 0.002 |
| Stainless Steels (soft) | 200–350 | 300–450 | 0.002 |
| Stainless Steels (hard) | 100–200 | 150–300 | 0.001 |
| Monel & High Nickel Steel | 75–175 | 75–200 | 0.002 |
| Titanium (soft) | 125–300 | 125–375 | 0.002 |
| Titanium (hard) | 50–150 | 50–175 | 0.001 |
| Nickel-Based High Temp Alloys | 50–100 | 50–125 | 0.001 |